If you want to learn PLC programming at home, the good news is that the barrier is lower than it has ever been. Several vendors give away full programming software, some with simulators that run your logic without hardware. Entry-level PLCs cost less than a decent multimeter. And 3D simulators let you control a virtual conveyor line from your laptop.
The catch is that it is easy to waste months clicking through tutorials without building anything an employer would care about. This guide sorts the options by cost, explains what each one teaches, and ends with a 12-week plan. It assumes you know basic electrical safety. If ladder logic is completely new to you, read our ladder logic basics first.
What You Can and Cannot Learn at Home
Be realistic about what a home setup does. It can teach you:
- How PLC programs are structured: scan cycle, tags or addresses, timers, counters, comparisons, math, sequences
- How to use one vendor's software well enough to go online, monitor, force and troubleshoot
- Basic wiring of discrete inputs and outputs, power supplies and simple field devices
- Communications basics such as connecting an HMI or a second device over Modbus or Ethernet
It will not teach you what it is like to work around 480-volt panels, stored energy, real machine hazards, or a production supervisor waiting on you. That only comes on the job. A home lab gets you to the interview and makes your first months faster. It does not replace supervised field experience.
Free PLC Software to Learn PLC Programming at Home
Start here, because it costs nothing and you can begin tonight.
| Tool | Cost | Simulator? | Best for |
|---|---|---|---|
| AutomationDirect Do-more Designer | Free | Yes, built in | Learning ladder logic with zero hardware |
| AutomationDirect CLICK software | Free | Not stated by vendor | Pairing with an inexpensive CLICK PLC |
| CODESYS Development System | Free download | Includes a demo SoftPLC runtime for Windows | Learning IEC 61131-3 languages including structured text |
| OpenPLC | Open source (GPL-3.0) | Runs as a soft PLC on a PC or Raspberry Pi | Tinkerers who want low-cost hardware |
Do-more Designer: the easiest zero-cost start
AutomationDirect says its Do-more Designer software is a free download with a built-in simulator that creates a virtual PLC. The Windows simulator uses the same code as the CPU firmware, handles discrete and analog I/O, and can even simulate PID loops with trend views. That makes it the most complete free option for someone with no hardware at all.
CODESYS: learn the international standard
The CODESYS Development System is free from the CODESYS Store and supports ladder diagram, function block diagram, structured text and sequential function chart. Its setup includes a demo version of the CODESYS Control Win SoftPLC, so you can run programs on your PC. CODESYS is used as the programming environment by many hardware makers, so time spent here carries over to several brands.
OpenPLC: for the Raspberry Pi crowd
OpenPLC is an open-source PLC toolchain. Its v3 runtime on GitHub is GPL-3.0 licensed and installs on Windows, Linux, Docker and Raspberry Pi. Note that the v3 repository is now marked end of life and points users to OpenPLC Runtime v4. It is a fun way to learn, but you will not find it running a production line at most US plants, so treat it as a learning tool rather than a résumé line.
PLC Trainer Kits and Hardware Worth Buying
Once simulation feels easy, a real PLC on your desk is the single best upgrade. Hardware forces you to deal with things software hides: power supply sizing, sinking versus sourcing inputs, wiring to terminals, IP addresses, and the moment where the program is right but nothing happens because a wire is loose.
AutomationDirect's CLICK PLUS line lists CPUs starting at $110, and its programming software is free. That makes it one of the cheapest ways to get genuine industrial hardware on a bench. Prices change, so confirm before you buy.
A practical first bench, in order of priority:
- A small PLC CPU with some built-in discrete I/O
- A 24 VDC DIN-rail power supply to power the PLC and your devices
- A short length of DIN rail and terminal blocks so you wire like a real panel
- A few pushbuttons, selector switches and pilot lights for inputs and outputs
- One proximity sensor and one photo-eye to learn 3-wire sensor wiring
- Later: an analog input device (a potentiometer or 4-20 mA signal) and a small HMI
Mount it all on a piece of plywood or a backplate. Draw your own schematic before you wire, label your wires, and keep it. A clean, documented trainer board is something you can photograph and talk through in an interview.
3D Plant Simulators: Factory I/O and Similar
Programming lights and buttons gets old. A 3D simulator gives your logic something real-looking to control: conveyors, sorters, pick-and-place units, tanks.
Factory I/O is the best-known option. It includes more than 20 industrial scenes and a parts library for building your own, and it connects to Siemens S7-1200/1500 and PLCSIM, Allen-Bradley Logix5000 and Micro800, Modbus TCP and OPC. The vendor offers a 30-day free trial of the full edition with no credit card. Paid editions are priced in euros, starting around 40 euros a year for the Starter edition and higher for brand-specific and Ultimate editions.
Simulators shine for sequence logic: what happens when a box jams, when two parts arrive at once, when the operator hits stop halfway through a cycle. That kind of thinking is exactly what separates someone who can write a program from someone who can write one that survives a real shift.
Which PLC Languages to Learn First
The international standard for PLC languages is IEC 61131-3. Its fourth edition, published in 2025, lists four languages: ladder diagram, function block diagram, structured text and sequential function chart. Instruction list, an older text language, was deprecated in 2013 and removed in 2025.
For a US technician, the order that pays off:
- Ladder diagram. Most US maintenance troubleshooting happens in ladder. Learn it until reading a rung feels like reading a sentence.
- Function block diagram. Common in process control and for PID and analog work.
- Structured text. Increasingly used for math, data handling and reusable code. If you have ever written any code, it will feel familiar.
- Sequential function chart. Useful for machine sequences; learn it once the others are comfortable.
A 12-Week Plan to Learn PLC Programming at Home
Aim for five to eight hours a week. Each phase ends with something you can show.
| Weeks | Focus | Finish with |
|---|---|---|
| 1-2 | Free software and simulator. Contacts, coils, latches, timers, counters. | A start/stop motor circuit with a run timer and cycle counter |
| 3-4 | Sequences and interlocks. Comparisons and basic math. | A three-step machine sequence with a fault that stops it safely |
| 5-6 | Buy and wire a trainer. Sinking/sourcing, 3-wire sensors. | A documented trainer board with your own drawing and wire labels |
| 7-8 | Move your sequence onto real hardware. Go online, monitor, force, debug. | A written note on a fault you created, found and fixed |
| 9-10 | 3D simulator or analog I/O. Scaling, alarms. | A sorting or tank-level program with alarms and a manual mode |
| 11-12 | Structured text basics and a simple HMI screen if you have one. | One routine rewritten in structured text; a one-page project summary |
That last deliverable matters. A one-page summary of what you built, what went wrong and how you fixed it is exactly the kind of evidence our guide on proving automation experience with a thin résumé recommends.
Turning Home Practice Into a Job
Home learning gets you noticed. It rarely gets you hired on its own. Pair it with a credential or a path that puts you around real equipment:
- Industrial maintenance roles are a common entry point. BLS notes that industrial machinery mechanics often get more than a year of on-the-job training, which can include computer programming taught by employers or equipment makers.
- Community college programs in mechatronics or industrial automation give you supervised time on real trainers and plant-style panels.
- ISA's Certified Control Systems Technician (CCST) program is a longer-term target. Level 1 requires five years of combined education and experience and a 150-question, four-hour exam, per ISA. Our CCST guide covers the levels.
In an interview, do not just say you taught yourself PLCs. Bring your trainer drawing, describe one fault you troubleshot, and explain what you would check first on a machine that will not start. That shows the troubleshooting mindset employers are actually screening for.
Bottom Line
Start free with Do-more Designer or CODESYS and get comfortable with ladder logic in a simulator. When that feels easy, spend a modest amount on a real entry-level PLC, a 24 VDC supply and a handful of buttons and sensors, and wire it like a real panel. Add a 3D simulator for sequence practice if you want it. Twelve focused weeks will not make you an experienced technician, but they will give you real skills, a documented project and specific stories to tell in an interview, which is more than most entry-level applicants bring.